Home > News

What Should We Pay Attention To When Printing A Handle Bag ?

Nov. 28, 2018 Share:

The first problem that the printing house needs to pay attention to when printing the carrier shopping bag for customers is the adjustment of the printing pressure. We all know that the paper used to print the handbags often has its own fixed weight, generally the weight per square meter. It is between 250 and 400 grams. This kind of paper is relatively thick paper. It needs to be very rigorously debugged during printing. Especially the pressure of the collective society must meet the corresponding standards. Otherwise, The printed effect is not satisfactory. For example, before the printing, the center distance between the plate cylinder and the blanket cylinder needs to be carefully debugged. Through such debugging, the printing requirements of different weights of paper can be satisfied. For example, an ordinary tote bag often needs to be printed before printing. This center distance is appropriately increased by about 0.2 to 0.4 mm. In addition to this, the problem to be paid attention to is to prevent the back surface from being stained during the printing process. I believe that many friends can understand it. Generally, the carrier bag is only printed on the outside, and the inside of the tote bag must be It is as white as new, but it needs to use printing ink when printing. If it is accidentally accidentally, it may cause the ink to stain the other side. This situation is obviously unacceptable to consumers, in order to avoid soiling the other side. Generally, a lot of remover and anti-adhesive agent are added to the ink during printing, in order to prevent the printed ink from sticking to the other side.

Handle Bag


Top